NHG60M Small Aperture Gloss Meter

This NHG60M Small Aperture Gloss Meter Instrument are Certified with
certify
1 Years Warranty (Additional support period of 3 years)

NHG60M micro aperture gloss meter adopts small aperture 2*4mm, with 60° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards of ASTM D523, ASTM D2457. NHG60 conforms to JJG696 first class gloss meter working requirement, corresponding with CIE 1931(2°) under CIE C light source.

 

NHG60M gloss meter can test material with gloss (0-1000Gu), and universally apply to paint, ink, stoving varnish, coating, wood products; marble, granite, vitrified polished tile, pottery brick and porcelain; plastic, paper; hardware industries, etc. for gloss measurement and gloss data transmission.

 

Features:

 

1. Small aperture: 2*4mm
2. 60° angle for semi gloss
3. Display 5 sets of measurement data, good for comparison
4. Measuring mode: basic measurement, statistical measurement, continuous measurement, QC measurement (only for GQC6 software).  
5. Continuous mode to check uniformity over large areas
6. Connect to PC, more extend functions
7. Input gloss value manually
8. Large touch screen operation, easy to use
9. Beauty appearance, good man-machine communication interface
10. Powerful functions to meet many different requirements
11. Large storage to save over 5000 data
12. Built-in lithium ion rechargeable battery.

 

Specifications:

 

NHG60M Micro Aperture Gloss Meter 
Model NHG60M
Measure Angle 60°
Comply with standard ISO 2813、GB/T 9754、ASTM D 523、ASTM D 2457
Measuring Area (mm) 2*4
Measurement Range 0~1000GU
Division Value 0.1GU
Measurement Range Repeatability
Reproducibility
0-10GU 10-100GU 100-1000GU
± 0.1GU  ± 0.2GU  ± 0.2%GU
± 0.2GU  ± 0.5GU  ± 0.5%GU
Measurement Standard
Conform with JJG696 first class gloss meter working requirement
Chromaticity Corresponding
Corresponding with CIE 1931(2°) under CIE C light source
Errors
±1.5 , ± 1.5%
Measuring Time
0.5s
Dimension
L*W*H : 160mm*75mm*90mm
Weight
350g
Language
Chinese/English
Battery
3.7V,3200mAh Li-ion Battery, >10000 times(within 8 hours)
Viewing Screen
TFT 3.5 inch, capacitive touch screen
Interface
USB/RS-232
Data Save
Basic mode: 1000, Statistical Mode: 5000, Continuous mode : 5000
Software
GQC6 Quality Control Software with QC report printing functions and more extended functions.
Operation Temperature
0~40℃(32~104°F)
Storage Temperature
 -20~50℃(-4~122°F)
Humidity
<85% relative humidity, no condensation
Standard Accessories
Power Adapter, USB cable, User Manual, CD (Including QC software), Calibration Plate
Optional Accessories
Miniature Printer
Note
The specifications are subject to change without notice.


12 Quality Inspection Processes

With 12 rigorous quality inspection processes in place, we ensure a high yield rate of up to 98% for batch processed precision parts.

DFM Analysis
DFM Analysis
Dimensional Tolerance
Dimensional Tolerance
Material Testing
Material Testing
CNC Machining
CNC Machining
FQC Detection
FQC Detection
SPC / CPK
SPC / CPK
Problem Found
Problem Found
Problem Solving
Problem Solving
OQC Detection
OQC Detection
Surface Treatment
Surface Treatment
ng60_All_Accessories1.jpg
Full Inspection
Package
Package

Our Valued Clients

FAQs About Gloss meter

Threenh Technology colorimeter is shipped with an operating instructions and video of English version.If you need an electronic version of the user manual, you can download it from our website download center

a. If this phenomenon occurred, it means the battery power is not enough. You need to charge the battery.

b. When charge the battery, please insert the battery to the instrument, and plug in the adapter to charge the battery. After 5 minutes, the instrument can be turned on.

c. If the instrument still cannot be turned on after charging 5 minutes, you can pull out the adapter and re-plug in to check it. Or repeat this operation.

d. If the instrument still cannot be turned on after charging 5 minutes, you can turn off the colorimeter and turn on it again to check it. Or repeat this operation.

e. If you have tried all the methods above but the colorimeter still cannot be turned on, please change the battery.

A colorimeter is a scientific instrument used to measure and analyze the color characteristics of objects or materials. It quantifies color by evaluating specific parameters related to human visual perception and standardized color spaces.

You can choose a colorimters depending on the substrate you are measuring the color of, whether it is opaque, translucent or transparent. In short, you can consider the following factors for choosing the right 3NH colorimeter for your needs: Sample Opacity, Physical Form, Optical Properties needed, Measurement Methods required, Scales and Indices needed, Instrument Standards Conformance (ASTM/ISO/Other), Instrument Geometry, Instrument Performance, Location (laboratory, portability, in-process) and Sample Handling requirements.

By systematically addressing these factors, you can select a colorimeter that optimizes accuracy, efficiency, and value for your specific application.Learn more from our ultimate guide on colorimeter selection. If unsure, consult the 3NH manufacturer for personalized recommendations based on your sample and workflow.


a. When the colorimeter is disconnected to the PC, "Connection Timeout" will occur. At the moment, you have to check whether the USB cable is well connected the colorimeter and the PC. Then you can re-plug the USB to try out.

b. After ensuring the colorimeter is connected to the PC with USB cable, turn on the colorimeter and enter the main menu. Select "Comm" and press "Enter" key to start communication.

c. Turn off CQCS3 software, and reopen it.

Related Gloss meter You May Also Like